Salta al contenuto principale

DigiTech RP70 Input/Output ¼” Ports Replacement

Cosa ti serve

  1. DigiTech RP70 Input/Output ¼” Ports  Replacement, Motherboard: passo 1, immagine 1 di 2 DigiTech RP70 Input/Output ¼” Ports  Replacement, Motherboard: passo 1, immagine 2 di 2
    • Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.

    • Remove the four 8mm Phillips #0 screws located on the back panel.

  2. DigiTech RP70 Input/Output ¼” Ports  Replacement: passo 2, immagine 1 di 2 DigiTech RP70 Input/Output ¼” Ports  Replacement: passo 2, immagine 2 di 2
    • Remove the back panel to expose the motherboard.

  3. DigiTech RP70 Input/Output ¼” Ports  Replacement: passo 3, immagine 1 di 1
    • Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

  4. DigiTech RP70 Input/Output ¼” Ports  Replacement: passo 4, immagine 1 di 1
    • Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

  5. DigiTech RP70 Input/Output ¼” Ports  Replacement, Input/Output ¼” Ports: passo 5, immagine 1 di 2 DigiTech RP70 Input/Output ¼” Ports  Replacement, Input/Output ¼” Ports: passo 5, immagine 2 di 2
    • Desolder the back of the motherboard where the damaged input/output port is located.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 301