Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement - Guida di riparazione iFixit

Introduzione

By the end of they guide you will have adjusted the height of the device

Cosa ti serve

Passo 1 Unplug

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement, Unplug: passo 1, immagine 1 di 1

Before you begin, remember to disconnect the mains plug.

Passo 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 2, immagine 1 di 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 2, immagine 2 di 2

Remove the dust extraction nozzle, blade and edge guide.
Refer to the instructions for the device to remove them.

Passo 3

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 3, immagine 1 di 1

Open wide to free up space for a better work area.

Passo 4

Using a large pat screwdriver, remove the small pin.

Passo 5

Then remove the black rod.

Passo 6

And finally unscrew the nut.

Passo 7

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 7, immagine 1 di 1

Here is the order of the parts to remove.

Passo 8

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 8, immagine 1 di 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 8, immagine 2 di 2

Then we replace the height adjustment.

Passo 9

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 9, immagine 1 di 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 9, immagine 2 di 2

Finally put each piece back in order.
To tighten, simply replace the tray at the bottom and hand tighten the nut.
With the lever, take the nut and put it in the locked position without effort
It should be tight but not touching the board.

Passo 10

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 10, immagine 1 di 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 10, immagine 2 di 2

Replace the blade, edge guide, and extraction bit on the saw.

Conclusione

to reassemble perform the steps in reverse order.

Un ringraziamento speciale a questi traduttori:

fr en

100%

HelloMacOS

HelloMacOS ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Autore

con 1 altro collaboratore

Céline Chemineau

Membro da: 01/29/20

16.581 Reputazione

95 Guide realizzate

+9 altri distintivi

Team

Leroy Merlin Membro di Leroy Merlin

Community

36 Membri

239 Guide realizzate

0 Commenti

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 32

Tutti i Tempi: 1,241