Aggiusta la tua roba Comunità Store

Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement

Introduzione

By the end of the guide you will have replaced your output shaft.

Cosa ti serve

  1. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement, Unplug: passo 1, immagine 1 di 1

    • Before you begin, remember to disconnect the mains plug.

    Traduci

  2. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 2, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 2, immagine 2 di 2

    • Remove the handle from the machine.

    Traduci

  3. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 3, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 3, immagine 2 di 2

    • Open the chuck to the maximum to gain access to the inner screw.

    Traduci

  4. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 4, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 4, immagine 2 di 2

    • Lock the chuck using a 15 spanner (thickness 3), then unscrew to the right with a pz3 screwdriver.

    Traduci

    • Using a pair of pliers, unscrew the chuck.

    Traduci

  7. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 6, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 6, immagine 2 di 2

    • Using a screwdriver or screwdriver, unscrew and open the device.

    Traduci

  8. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 7, immagine 1 di 1

    • Unscrew the four screws.

    Traduci

    • Using a screwdriver, lift the spring of the two brushes.

    Traduci

    • Remove the output shaft.

    • Before replacing the new part, be sure to re-grease.

    Traduci

    • Reposition the brush springs.

    Traduci

  12. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 11, immagine 1 di 1

    • Then retighten the four screws.

    Traduci

  13. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 12, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 12, immagine 2 di 2

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Tighten the screws to close the device.

    Traduci

  14. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 13, immagine 1 di 1

    • Replace the chuck.

    Traduci

  15. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 14, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 14, immagine 2 di 2

    • Screw the chuck back on by hand.

    • Then using a screwdriver replace the screw, and screw to the left.

    Traduci

  16. Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 15, immagine 1 di 2 Dexter 900W Corded Hammer Drill - 900ID2.5 Output Shaft Replacement: passo 15, immagine 2 di 2

    • Finally replace the handle.

    Traduci
Conclusione

in order to reassemble preform the steps in reverse order.

Un ringraziamento speciale a questi traduttori:

fr en

100%

HelloMacOS

HelloMacOS ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Autore

con 1 altro collaboratore

Céline Chemineau

Membro da: 01/29/20

16.581 Reputazione

95 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Leroy Merlin Membro di Leroy Merlin

Community

36 Membri

239 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 18

Tutti i Tempi: 942