Aggiusta la tua roba Comunità Store

Dexter 750W Corded Jigsaw Motor Replacement

Introduzione

This guide will show you how to replace your motor

Cosa ti serve

  1. Dexter 750W Corded Jigsaw Motor Replacement, Unplug: passo 1, immagine 1 di 1

    • Before you begin, remember to disconnect the mains plug.

    Traduci

  2. Dexter 750W Corded Jigsaw Motor Replacement: passo 2, immagine 1 di 1

    • Remove the vacuum adapter from the back of the device.

    Traduci

  3. Dexter 750W Corded Jigsaw Motor Replacement: passo 3, immagine 1 di 2 Dexter 750W Corded Jigsaw Motor Replacement: passo 3, immagine 2 di 2

    • Using a screwdriver or screwdriver, unscrew and open the device.

    • Unlock the tray by lifting the lever.

    Traduci

    • Use needle nose pliers and remove the clip located next to the blade holder.

    Traduci

    • Remove the blade holder, keeping the slider at the end of the holder.

    Traduci

  6. Dexter 750W Corded Jigsaw Motor Replacement: passo 6, immagine 1 di 1

    • Unscrew the two screws and set them aside.

    Traduci

    • Remove the two carbons located next to the stator.

    Traduci

    • Lift the stator, then lever out the motor.

    Traduci

  10. Dexter 750W Corded Jigsaw Motor Replacement: passo 9, immagine 1 di 1

    • Put the new motor back in its place.

    Traduci

  11. Dexter 750W Corded Jigsaw Motor Replacement: passo 10, immagine 1 di 2 Dexter 750W Corded Jigsaw Motor Replacement: passo 10, immagine 2 di 2

    • Collect the end cap on the old engine.

    • Put it back on the new motor.

    • Put some grease on the tip.

    Traduci

  12. Dexter 750W Corded Jigsaw Motor Replacement: passo 11, immagine 1 di 1

    • Replace the two screws to stabilize the motor.

    Traduci

    • Return the blade holder to its location

    • Make sure you put each piece in its place.

    Traduci

    • Replace the staple in the same location. The curved side of the staple should go to the rounded side of the bracket.

    • Lubricate the whole

    • Make sure you put each piece in its place.

    Traduci

  15. Dexter 750W Corded Jigsaw Motor Replacement: passo 14, immagine 1 di 2 Dexter 750W Corded Jigsaw Motor Replacement: passo 14, immagine 2 di 2

    • Put the coals back in their places.

    Traduci

  16. Dexter 750W Corded Jigsaw Motor Replacement: passo 15, immagine 1 di 1

    • Before closing, lubricate each gear.

    Traduci

  17. Dexter 750W Corded Jigsaw Motor Replacement: passo 16, immagine 1 di 1

    • Close and screw the device.

    Traduci
Conclusione

follow guide through or in reverse to reassemble

Un ringraziamento speciale a questi traduttori:

fr en

100%

HelloMacOS

HelloMacOS ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Autore

con 1 altro collaboratore

Céline Chemineau

Membro da: 01/29/20

16.581 Reputazione

95 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Leroy Merlin Membro di Leroy Merlin

Community

37 Membri

239 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 508