Aggiusta la tua roba Comunità Store

Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement

Introduzione

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

Cosa ti serve

  1. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement, Unplug: passo 1, immagine 1 di 1

    • Before you begin, remember to disconnect the mains plug.

    Traduci

  2. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 2, immagine 1 di 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 2, immagine 2 di 2

    • Remove the three screws from the pad.

    Traduci

  3. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, immagine 1 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, immagine 2 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, immagine 3 di 3

    • Be careful to keep the three small marbles.

    Traduci

  4. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 4, immagine 1 di 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 4, immagine 2 di 2

    • Unscrew the screws to open the shell.

    Traduci

  5. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 5, immagine 1 di 1

    • Remove the orange cap.

    Traduci

    • Using a screwdriver lift the brushes.

    Traduci

  8. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, immagine 1 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, immagine 2 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, immagine 3 di 3

    • Remove the carbon from its housing then take it out.

    • Using pliers, fold down the small tab.

    Traduci

  9. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 8, immagine 1 di 1

    • Replace the new carbon in its carbon holder.

    Traduci

    • Reconnect the carbon, test if the carbon slides well inside.

    Traduci

  11. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 10, immagine 1 di 1

    • Replace the coals in their housing.

    Traduci

  12. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 11, immagine 1 di 1

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Replace the screws on the hull.

    Traduci

  13. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, immagine 1 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, immagine 2 di 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, immagine 3 di 3

    • Replace the retaining flange, be careful to have the three small balls.

    Traduci

  14. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 13, immagine 1 di 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 13, immagine 2 di 2

    • Tighten the three screws of the retaining plate then that of the pad.

    Traduci
Conclusione

To reassemble follow guide through or in reverse

Un ringraziamento speciale a questi traduttori:

fr en

100%

HelloMacOS

HelloMacOS ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Autore

con 1 altro collaboratore

Céline Chemineau

Membro da: 01/29/20

16.581 Reputazione

95 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Leroy Merlin Membro di Leroy Merlin

Community

36 Membri

239 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 163