Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the computer over, loosen the tw o captive screws on the hard drive cover, and then remove the cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the four captive screws on the hard drive cage and then lift the pull-tab to flip the cage towards the center of the computer so that the SATA cables and connec tors are accessible.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the SATA cables from the hard drive or drives that are installed in the cage.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove two screws on each side of the hard drive cage to free the hard drive, then lift the drive out of its tray in the cage.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.