Introduzione

The purpose of this guide is to remove the hard drive from the computer if it is broken or having issues. Some of the problems associated with a broken Hard Drive are that your computer is not booting up completely, some programs that were working are not recognized anymore, the Hard Drive is not recognized in the C: of "my computer", the computer tells you the drive is not recognized, or that the drive will fail.

Parti

Nessuna parte richiesta.

Turn the computer upside down with the battery facing you.
  • Turn the computer upside down with the battery facing you.

  • Turn the computer off and disconnect the charging cable from the computer.

  • Failure to unplug the charging cable may result in electric shock.

Aggiungi Commento

Push the switch as far to the right as possible to unlock the battery.
  • Push the switch as far to the right as possible to unlock the battery.

Aggiungi Commento

  • Remove the battery using two hands and pull it away from the computer.

Aggiungi Commento

  • Remove the four Phillips #1 screws holding the Hard Drive in place.

    • Four 3.5mm Phillips #1 screws

Aggiungi Commento

  • Pull the Hard Drive out gently using the tab. It should provide enough leverage to pull the drive out smoothly.

Aggiungi Commento

  • Remove both 3.5mm Phillips #1 screws on either side of the plastic casing.

    • There is a second screw on the other side of the casing.

  • Then gently separate the drive from its casing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tyler Scholz

Membro da: 22/01/2015

440 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 18-4, Maness Winter 2015 Membro di Cal Poly, Team 18-4, Maness Winter 2015

CPSU-MANESS-W15S18G4

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 19

Tutti i Tempi: 870