Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

In this guide you will be removing four screws and unplugging the hard drive. This is a quick easy replacement. You may also need to reinstall windows after completeing the hard drive replacement.

  1. Find and remove the two .3cm torx head screws using a T5 screwdriver.
    • Find and remove the two .3cm torx head screws using a T5 screwdriver.

    • Find and remove the six Phillips head .3cm screws using a Phillips #0 screwdriver.

  2. Unplug the battery indicator.
    • Unplug the battery indicator.

  3. Find and remove the four .4cm phillips head screws holding the hard drive in place.
    • Find and remove the four .4cm phillips head screws holding the hard drive in place.

  4. Gently unplug and remove the hard drive
    • Gently unplug and remove the hard drive

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

SHELDON SANTOS

Membro da: 19/03/2018

594 Reputazione

6 Guide realizzate

Team

This was a helpful tutorial, except for two small points. #1 - The yellow & red dots on step 1 are reversed; the T5 screws are the six along the two edges of the back panel and the P0 (Phillips #0) screws are under the face plate. #2 - the battery cable should ALWAYS be unplugged for component safety prior to doing any work on a laptop. An additional safety step (though optional) would be to physically remove the battery from the laptop prior to doing any work on it.

ICU Alex - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 21

Tutti i Tempi: 567