Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Make sure the laptop is powered off and unplug all cables before beginning any repair.
    • Make sure the laptop is powered off and unplug all cables before beginning any repair.

    • Remove eight 3 mm screws from the underside of the case using a T5 Torx screwdriver.

  2. The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
    • The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.

    • Wedge the case apart with a nylon spudger.

    • If the plastic one isn't possible to insert, use the metal spudger to carefully create a small gap first.

    • Once the spudger is inserted, slide it along each side of the laptop

  3. The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
    • The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.

    • Lift the back panel of the laptop off and set it aside.

  4. Remove three screws connecting the headphone jack to the back panel using a Phillips #00 screwdriver. Remove three screws connecting the headphone jack to the back panel using a Phillips #00 screwdriver.
    • Remove three screws connecting the headphone jack to the back panel using a Phillips #00 screwdriver.

  5. Carefully lift the headphone jack off the removed panel.
    • Carefully lift the headphone jack off the removed panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Austin Sa

Membro da: 30/03/2022

372 Reputazione

3 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 32

Tutti i Tempi: 34