Introduzione

In this guide, we will be showing you how to remove the Hard Drive.

Parti

Nessuna parte richiesta.

  1. Disconnect the battery cable from the system board.
    • Disconnect the battery cable from the system board.

      • Remove the screws that secure the battery to the palm-rest assembly.

        • Lift the battery, along with its cable, off the palm-rest assembly.

    • Turn the computer over, open the display, and press the power button for about five seconds to ground the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

    Aggiungi Commento

  2. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
  3. Remove the screw that secures the mSATA card to the palm-rest assembly.
    • Remove the screw that secures the mSATA card to the palm-rest assembly.

      • Slide the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

    Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Johnathan Hammond

Membro da: 28/02/2018

35.698 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 92