Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Remove the screws that secure the base cover to the computer.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Slide the base cover towards the front of the computer. Lift it up and away from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Lift the black cable-release clip to release the battery cable from the connector on the system board and disconnect the battery cable.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 1
    • Remove the screws that secure the battery to the computer.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 1
    • Lift the battery up and away from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Linea Traguardo

Altre 4 persone hanno completato questa guida.

Johnathan Hammond

Membro da: 02/28/18

44.953 Reputazione

408 Guide realizzate

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,703