Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Remove the screws that secure the base cover to the computer.
    • Remove the screws that secure the base cover to the computer.

  2. Pry the base cover along the edges to loosen it.
    • Pry the base cover along the edges to loosen it.

  3. Lift and remove the base cover from the computer.
    • Lift and remove the base cover from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  5. Disconnect the battery cable from its connector on the system board.
    • Disconnect the battery cable from its connector on the system board.

  6. Release the tabs that secure the battery in the battery bay.
    • Release the tabs that secure the battery in the battery bay.

  7. Lift and remove the battery from the computer.
    • Lift and remove the battery from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  8. Pry the retention clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.
    • Pry the retention clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membro da: 28/02/2018

35.885 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

930 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 104