Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press and slide the two buttons outwards and away from the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the battery away and parallel from the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the eight 6mm screws with a Philips #1 screw driver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift back cover from the groove on the left side of the cover next to the symbol.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unclip the power supply by pulling the cable directly up and out of the socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 3mm screws located around the edge of the fan with a Philips #1 screw driver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently lift and pull to the left until the fan is free from the heatsink.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the four 8mm screws using a Phillips #1 screwdriver until the heatsink is free.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up on the heatsink to remove it from the laptop.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.