Introduzione

In this guide, we will be showing you how to remove and replace the Hard Drive.

Parti

Nessuna parte richiesta.

  1. Slide both battery latches to the open position.
    • Slide both battery latches to the open position.

      • Slide the battery out of the battery bay.

    Aggiungi Commento

  2. Loosen the five screws that secure the hard-drive compartment cover.
    • Loosen the five screws that secure the hard-drive compartment cover.

      • Remove the cover and set it aside.

    Aggiungi Commento

    • Remove the three screws that secure the hard drive to the computer.

    • One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.

      • Disconnect the hard drive cable connector from the motherboard.

    • Pull the mylar tab to release the hard drive.

    • Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.

    Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Johnathan Hammond

Membro da: 28/02/2018

35.698 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 75