Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Slide the battery release latches until they click into place.

    • Slide the battery out of the battery bay.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Open the display all the way so that it rests flat on your work surface.

    • NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.

    • Insert a plastic scribe into the indent to lift the hinge cover on the right side.

    • Moving from right to left, ease the hinge cover up, then remove it and set it aside.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Remove the two M2.5 x 5-mm screws at the top of the keyboard.

    • NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.

    • Lift the keyboard and hold it up and slightly forward to access to the keyboard connector.

    • Rotate the keyboard connector latch upward to release the keyboard cable.

    • Slide the keyboard cable out of the keyboard connector.

Linea Traguardo

Johnathan Hammond

Membro da: 02/28/18

44.953 Reputazione

408 Guide realizzate

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 16

Tutti i Tempi: 376