1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1]. Pry the base cover from the edge [2].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Disconnect the battery cable from the connector on the system board [1]. Remove the M2x3L screws that secure the battery to the computer [2].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

  4. Pry the clips securing the memory module until the memory pops-up [1]
    • Pry the clips securing the memory module until the memory pops-up [1]

    • Lift the memory module away from the connector [2].

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Johnathan Hammond

Membro da: 28/02/2018

35.786 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 95