1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

      • Pry the base cover from the edge [2].

      • Lift the base cover away from the computer

    Aggiungi Commento

  2. Disconnect the battery cable from the connector on the system board [1].
    • Disconnect the battery cable from the connector on the system board [1].

      • Remove the M2x3L screws that secure the battery to the computer [2].

    WIth what screwdriver?

    John - Replica

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Lift the latch and disconnect the hard drive cable from the computer [1].

      • Pry the hard drive cable to release from the adhesive [2].

    Aggiungi Commento

    • Remove the M2.5x5L screws that secure the hard drive to the computer [1].

      • Lift the hard drive away from the computer [2].

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Johnathan Hammond

Membro da: 28/02/2018

35.698 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 15

Tutti i Tempi: 53