Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Remove the screws that secure the back cover to the computer.
    • Remove the screws that secure the back cover to the computer.

  2. Using a scribe, pry the edges of the back cover from all sides [1].
    • Using a scribe, pry the edges of the back cover from all sides [1].

    • Lift the back cover from the computer [2].

  3. Disconnect the battery cable from the connector on the system board [1].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

    • Lift and remove the battery from the computer [3].

  4. Pull the retention clips from the memory module until it pops up. [1]
    • Pull the retention clips from the memory module until it pops up. [1]

    • Remove the memory module from the connector on the system board. [2]

Conclusione

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membro da: 28/02/2018

36.122 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

926 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 159