Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Slide the battery release latch to the side. {2}

    • Slide the battery out of the battery bay. {1}

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Remove the three screws securing the hard drive assembly to the computer base.

    • Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.

    • Lift the hard drive assembly out of the computer base.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 1
    • Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 1
    • Pull the interposer to disconnect it from the hard drive.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Johnathan Hammond

Membro da: 02/28/18

44.953 Reputazione

408 Guide realizzate

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

Un commento

My laptop won't charge

rj3488323 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 21

Tutti i Tempi: 850