Parti

Nessuna parte richiesta.

  1. Slide the battery release latch until it clicks into place.
    • Slide the battery release latch until it clicks into place.

    • Slide the battery out of the battery bay.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Remove the six screws that secure the base cover to the computer base.
    • Remove the six screws that secure the base cover to the computer base.

    • Lift the base cover off the computer at an angle as shown in the following illustration.

  4. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
    • Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

    • Remove the memory module from the memory module connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membro da: 28/02/2018

35.786 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 15