Salta al contenuto principale

Dell Studio 1555 Display Replacement

Cosa ti serve

  1. Dell Studio 1555 Display Replacement, Battery: passo 1, immagine 1 di 1
    • Turn off and unplug the laptop.

    • Failure to properly turn off device before handling the battery could result in electrical shock.

    • Flip the laptop so the underside is facing up with the battery closest to you.

  2. Dell Studio 1555 Display Replacement: passo 2, immagine 1 di 3 Dell Studio 1555 Display Replacement: passo 2, immagine 2 di 3 Dell Studio 1555 Display Replacement: passo 2, immagine 3 di 3
    • Slide the locking switch to the left to release the battery.

  3. Dell Studio 1555 Display Replacement: passo 3, immagine 1 di 1
    • Gently pull the battery away from the device.

  4. Dell Studio 1555 Display Replacement, Display: passo 4, immagine 1 di 2 Dell Studio 1555 Display Replacement, Display: passo 4, immagine 2 di 2
    • Insert a plastic opening tool between the bezel and the display cover.

    • Wiggle it to the release the latches.

    • Separate the bezel from the cover.

  5. Dell Studio 1555 Display Replacement: passo 5, immagine 1 di 2 Dell Studio 1555 Display Replacement: passo 5, immagine 2 di 2
    • Remove the four 3 mm screws securing the LCD using the #1 Phillips screwdriver.

  6. Dell Studio 1555 Display Replacement: passo 6, immagine 1 di 1
    • Separate the LCD assembly from the display cover so you will be able to access the webcam cable.

    • Unplug the camera cable.

  7. Dell Studio 1555 Display Replacement: passo 7, immagine 1 di 2 Dell Studio 1555 Display Replacement: passo 7, immagine 2 di 2
    • Place the LCD face down on the top cover.

    • Remove the sticky tape securing the video cable connector.

    • Unplug the video cable from the screen.

  8. Dell Studio 1555 Display Replacement: passo 8, immagine 1 di 3 Dell Studio 1555 Display Replacement: passo 8, immagine 2 di 3 Dell Studio 1555 Display Replacement: passo 8, immagine 3 di 3
    • Remove the LCD from the laptop.

    • Remove the four 3mm screws holding the mounting brackets using the #1 Phillips screwdriver. Two on each side.

    • You will have to transfer the mounting brackets to the new screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,552