Parti

Nessuna parte richiesta.

  1. Slide the battery release latch until it clicks into place.
    • Slide the battery release latch until it clicks into place.

    • Turn the computer top side up, open the display, and press the power button to ground the system board.

  2. Turn the computer top side up, open the display, and press the power button to ground the system board.
    • Turn the computer top side up, open the display, and press the power button to ground the system board.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove the four screws securing the hard drive assembly to the computer.
    • Remove the four screws securing the hard drive assembly to the computer.

    • Pull the hard drive cable pull-tab to disconnect the cable from the system board connector.

    • Pull on the hard drive pull-tab to lift the hard drive assembly from the bay.

  5. Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.
    • Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.

    • Lift the hard drive cage off the hard drive.

  6. Disconnect the hard drive cable from the connector on the hard drive..
    • Disconnect the hard drive cable from the connector on the hard drive..

Conclusione

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membro da: 28/02/2018

35.786 Reputazione

408 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 87