Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the battery release latch and remove the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two M2 x 3-mm screws.
-
Slide the cover toward the front of the computer to release the tabs from the base assembly.
-
Remove the cover from the base assembly.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Starting on the left, gently lift the LED cover and disconnect the power cable and the biometer cable if present.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four M2 x 3-mm screws along the top of the keyboard.
-
Use the metal pull tabs to gently slide the keyboard toward the back of the computer to disconnect the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
-
Remove the memory module from the connector.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.