Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Cosa ti serve
-
-
-
Remove the two M2 x 3-mm screws.
-
Slide the cover toward the front of the computer to release the tabs from the base assembly.
-
Remove the cover from the base assembly.
-
-
-
Starting on the left, gently lift the LED cover and disconnect the power cable and the biometer cable if present.
-
Quasi finito!
To reassemble your device, follow these instructions in reverse order.
Conclusione
To reassemble your device, follow these instructions in reverse order.
Team
