Introduzione

Replace the Upper Fan in the computer tower to prevent overheating and computer damage.

Parti

Nessuna parte richiesta.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Aggiungi Commento

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Aggiungi Commento

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Aggiungi Commento

    • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

    Aggiungi Commento

    • Remove the power supply that connects the upper fan to the motherboard. The power supply has black, red, green and yellow wires.

    Aggiungi Commento

    • Remove the rubber grommets from the base of the fan. A screwdriver or spudger may be useful.

    Aggiungi Commento

    • Pull the upper fan out of the computer.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Tom

Membro da: 04/10/2010

799 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 22-4, Maness Fall 2010 Membro di Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membri

13 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 9

Tutti i Tempi: 4,692