Aggiusta la tua roba

Diritto alla Riparazione

Store

Dell Optiplex SX280 Lower Fan Replacement

Scritto Da: Tom (e 4 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0
  • Completamenti: 2

Difficoltà

Moderato

Passi

7

Tempo Necessario

10 minuti

Sezioni

2

Contrassegni

1

Confusing Text

Testo Confuso

Parte del testo di questa guida è confusionario, doppio, o fuori tema. Modificarlo per renderlo più chiaro!

Introduzione

Remove the Lower Fan from the computer tower.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Modifica

  2. Lay the computer on its side; you will see a blue knob. Turn this knob 90 deg clockwise.

    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Modifica

  3. Slide the panel case forward about 1/2 inch while knob is turned. Lift panel case off computer.

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Modifica

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  5. Remove the large blue cover from the computer. There are no screws or tabs holding it in place. Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

    • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

    Modifica

  6. Remove the power supply that connects the lower fan to the motherboard, distinguished by it's black, red, green and yellow wires.

    • Remove the power supply that connects the lower fan to the motherboard, distinguished by it's black, red, green and yellow wires.

    • Make sure to press on the release tab while removing the power supply.

    Modifica

  7. Remove the rubber grommets from the base of the fan. A spudger may be useful. Remove the rubber grommets from the base of the fan. A spudger may be useful.

    • Remove the rubber grommets from the base of the fan. A spudger may be useful.

    Modifica

  8. Press on the blue release tab and remove the fan. Press on the blue release tab and remove the fan.

    • Press on the blue release tab and remove the fan.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Tom

Membro da: 04/10/2010

829 Reputazione

7 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 22-4, Maness Fall 2010 Membro di Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membri

26 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,950