Introduzione

Remove and Replace the Hard Drive

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Aggiungi Commento

Lay the computer on its side; you will see a blue knob.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Aggiungi Commento

  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Aggiungi Commento

  • Unplug the blue cable that connects the hard drive to the motherboard.

Aggiungi Commento

  • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

Aggiungi Commento

  • Squeeze the release tabs on either side of the hard drive.

Aggiungi Commento

  • Slide the Hard Drive out while squeezing the tabs.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Wyatt

Membro da: 06/10/2010

742 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 22-4, Maness Fall 2010 Membro di Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membri

13 Guide realizzate

Thanks for great tutorial.

Politers - Replica

Yeah great tutorial!

Rebinas - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 5,379