Introduzione

Replace the Dead Battery on the Motherboard

Parti

Nessuna parte richiesta.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Aggiungi Commento

Lay the computer on its side; you will see a blue knob.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Aggiungi Commento

  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Aggiungi Commento

  • Unplug the blue cable that connects the hard drive to the motherboard.

Aggiungi Commento

  • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

Aggiungi Commento

  • Squeeze the release tabs on either side of the hard drive.

Aggiungi Commento

  • Slide the Hard Drive out while squeezing the tabs.

Aggiungi Commento

  • Under the hard drive, there is a circular, silver battery connected to the motherboard.

  • Use a spudger to gently pry the battery from the motherboard.

Aggiungi Commento

  • Lift the battery out of the motherboard.

Aggiungi Commento

  • Upon replacement, simply push the battery into the motherboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

Tom

Membro da: 04/10/2010

799 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 22-4, Maness Fall 2010 Membro di Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membri

13 Guide realizzate

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 19

Tutti i Tempi: 10,819