Salta al contenuto principale

Strumenti

Nessun attrezzo specificato.

  1. Power down your PC and remove the power cord from the back. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

  2. Press and hold the power button for about 10 seconds, then release. This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.
    • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

  3. With the computer standing upright, firmly pull on the tab at the back of the computer.
    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

  4. Remove the power and SATA data cables. SATA power SATA data
    • Remove the power and SATA data cables.

    • SATA power

    • SATA data

  5. Pull the two tabs on the hard drive and pull up Pull the two tabs on the hard drive and pull up Pull the two tabs on the hard drive and pull up
    • Pull the two tabs on the hard drive and pull up

  6. Now take the tray off of the hard drive. Now take the tray off of the hard drive. Now take the tray off of the hard drive.
    • Now take the tray off of the hard drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Padraic Hoselton

Membro da: 22/08/2017

3.042 Reputazione

13 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

288 Membri

821 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 32

Tutti i Tempi: 752