Aggiusta la tua roba

Diritto alla Riparazione

Store

Dell Optiplex 745 Small Form Factor Processor Replacement

Scritto Da: Abdullah Khan (e un altro collaboratore)
  • Commenti: 0
  • Preferiti: 1
  • Completamenti: 3

Difficoltà

Moderato

Passi

5

Tempo Necessario

5 - 10 minuti

Sezioni

2

Contrassegni

1

Featured Student Guide

Guida Studente in Evidenza

Questa guida è frutto del duro lavoro dei nostri bravissimi studenti e il nostro staff iFixit la trova eccezionalmente brillante.

Introduzione

In this guide, we will show you how to take out the CPU (processor), and replace it with a new one.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Pull the tab and the lid will pop up. Pull the tab and the lid will pop up.

    • Pull the tab and the lid will pop up.

    Modifica

  2. Grab the lid and pull it up and off. Grab the lid and pull it up and off.

    • Grab the lid and pull it up and off.

    Modifica

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  4. The processor is located inside the heat sink (indicated by the marker).

    • The processor is located inside the heat sink (indicated by the marker).

    Modifica

  5. Unscrew the 9.5 mm screws from heatsink on both sides using the Phillips #2 screwdriver. If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device. If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device.

    • Unscrew the 9.5 mm screws from heatsink on both sides using the Phillips #2 screwdriver.

    • If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device.

    Modifica

  6. Push the small lever downwards, then sideways and upwards, in order to release it from the hook. Remove the processor from its casing. Remove the processor from its casing.

    • Push the small lever downwards, then sideways and upwards, in order to release it from the hook.

    • Remove the processor from its casing.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

Abdullah Khan

Membro da: 03/10/2017

181 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

USF Tampa, Team S5-G5, Walkup Fall 2017 Membro di USF Tampa, Team S5-G5, Walkup Fall 2017

USFT-WALKUP-F17S5G5

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 665