Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Dell OptiPlex GX260 Optical Drive Replacement

Cosa ti serve

  1. Dell OptiPlex GX260 Optical Drive Replacement, Case: passo 1, immagine 1 di 2 Dell OptiPlex GX260 Optical Drive Replacement, Case: passo 1, immagine 2 di 2
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

  2. Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: passo 2, immagine 1 di 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: passo 2, immagine 2 di 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: passo 2, immagine 3 di 3
    • Identify the optical drive in the case.

    • Remove the analog audio cable from the optical drive.

    • Remove the IDE cable form the optical drive by pulling straight up on the orange plastic tab..

    • Remove the power cable from the optical drive.

  3. Dell OptiPlex GX260 Optical Drive Replacement: passo 3, immagine 1 di 1
    • Push the two green tabs toward each other to release the optical drive and lift it out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Team

Cal Poly, Team 4-48, Amido Fall 2010 Membro di Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 Membri

27 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 19

Tutti i Tempi: 8,854