Turn the laptop over so that the bottom is facing up. Remove the two #0 3 mm screws holding the cover plate.
  • Turn the laptop over so that the bottom is facing up.

  • Remove the two #0 3 mm screws holding the cover plate.

Aggiungi Commento

Push both metal retaining clips outward at the same time using your hands carefully.
  • Push both metal retaining clips outward at the same time using your hands carefully.

  • If done correctly the memory should pop up at a 45 degree angle.

Aggiungi Commento

Gently pull the memory out of the retainer at the same 45 degree angle.
  • Gently pull the memory out of the retainer at the same 45 degree angle.

Aggiungi Commento

Insert the new memory at 45 degree angle.
  • Insert the new memory at 45 degree angle.

Aggiungi Commento

Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.
  • Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.

Aggiungi Commento

Conclusione

To reassemble your device, reinstall cover plate with two #0 screws.

Thomas Wong

Membro da: 20/01/2012

23 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 11-20, Maness Winter 2012 Membro di Cal Poly, Team 11-20, Maness Winter 2012

CPSU-MANESS-W12S11G20

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,990