Salta al contenuto principale

Introduzione

Removal and replacement of the hard drive

Strumenti

Nessun attrezzo specificato.

Parti

  1. Remove the charger from the laptop.
    • Remove the charger from the laptop.

    • Turn the laptop over and locate the battery slide lock. Slide the switch and gently lift up the battery.

    • If you are replacing other components, leave the battery out.

    • If you are only replacing the battery, reverse the steps to install a new battery.

  2. Locate the hard drive compartment in the lower right hand corner of the bottom of the laptop. It is located next to the empty battery compartment.  The words 'Strike Zone' are engraved on it. Locate and remove three philips head screws. These screws measure 3.55mm in length and 2.93mm in width with a fine thread.
    • Locate the hard drive compartment in the lower right hand corner of the bottom of the laptop. It is located next to the empty battery compartment. The words 'Strike Zone' are engraved on it.

    • Locate and remove three philips head screws. These screws measure 3.55mm in length and 2.93mm in width with a fine thread.

    • Gently slide grip pad to the right and the hard drive should slide out.

    • Reverse the process to install new hard drive.

Conclusione

Removing and replacing the hard drive

Altre 2 persone hanno completato questa guida.

Elizabeth

Membro da: 06/09/2014

396 Reputazione

2 Guide realizzate

Team

Pasco Hernando, Team 1-2, Prince Fall 2014 Membro di Pasco Hernando, Team 1-2, Prince Fall 2014

PHSC-PRINCE-F14S1G2

10 Membri

7 Guide realizzate

You also need to unscrew the grip pad from the old hd and screw it onto the new one.

Sue - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 30

Tutti i Tempi: 1,953