Introduzione

In this guide, we will be showing you how to remove and replace the Hard Drive.

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

  1. Remove the four screws that secure the hard-drive assembly.
    • Remove the four screws that secure the hard-drive assembly.

    • Turn the computer over and lift the hard-drive assembly out of the hard-drive bay to disconnect the hard-drive assembly from the connector on the system board.

    • Pull the interposer to disconnect it from the hard drive.

    • Connect the interposer to the NEW hard drive.

    • Align the hard-drive assembly with the connector on the system board and press the hard-drive assembly into the hard-drive bay until it is fully seated.

    • Turn the computer over and replace the four screws that secure the hard-drive assembly.

Linea Traguardo

Un'altra persona ha completato questa guida.

Terrence15

Membro da: 18/12/2017

70.198 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 33

Tutti i Tempi: 251