Introduzione

This guide will teach you how to remove the buttons below the track pad from the laptop device.

Parti

Nessuna parte richiesta.

  1. Locate the release tabs located on either side of the battery, on the bottom of the laptop
    • Locate the release tabs located on either side of the battery, on the bottom of the laptop

    • Push the release tabs toward the center of the device.

    • Remove the battery.

    Aggiungi Commento

  2. Take the replacement battery, insert it into the original position  in the laptop.
    • Take the replacement battery, insert it into the original position in the laptop.

    • Slide the release tabs back into place.

    Aggiungi Commento

    • Remove the two countersunk keyboard screws using the Phillips #00 screwdriver

    • Battery removal is not necessary for keyboard removal.

    Aggiungi Commento

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Lift up the keyboard using your fingers or a plastic opening tool

    • Do not not tear the ribbon cable hidden behind the keyboard

    • Disconnect the cable by sliding the connector ears outward

    Aggiungi Commento

    • Remove the seven Phillips #00 screws that hold the metal component to the frame

    • Detach the two ribbon cables on either side of the silver panel

    • Be careful to not tear the ribbon cables hidden behind the panel

    • Gently lift the silver panel from the laptop using the plastic opening tool

    • Set the laptop aside

    • depending on your model, there could still be some hidden screws on the bottom of the case of the mini that hold the palm-rest in place

    Aggiungi Commento

    • Flip the silver panel over

    • Remove the four screws that connect the buttons to the panel using the Phillips #00 Screwdriver

    Aggiungi Commento

    • Remove the covers from the panel

    • Remove the buttons from the panel

    • Release the mouse button by flipping the center connector tab up

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kyle Beekman

Membro da: 05/04/2012

141 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 14-10, Forte Spring 2012 Membro di Cal Poly, Team 14-10, Forte Spring 2012

CPSU-FORTE-S12S14G10

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,878