Dell Inspiron 8600 Lower Case Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

We are going to show you how to remove the lower case, how to remove the components, how to put them back in and finally how to attach the upper case back onto the lower case.

Cosa ti serve

Passo 1 Battery

Dell Inspiron 8600 Lower Case Replacement, Battery: passo 1, immagine 1 di 1

Remove the battery from the bottom left of the laptop as shown.
Remove the battery before operating on the computer to avoid electrocution.

Traduci

Passo 2 Hinge Cover

Dell Inspiron 8600 Lower Case Replacement, Hinge Cover: passo 2, immagine 1 di 3

Dell Inspiron 8600 Lower Case Replacement, Hinge Cover: passo 2, immagine 2 di 3

Dell Inspiron 8600 Lower Case Replacement, Hinge Cover: passo 2, immagine 3 di 3

Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.
You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.
Be careful of the wire attached to the underside of the hinge cover.

Traduci

Passo 3

Pull the small black tab on the right hand side of the laptop.
You have now removed the hinge cover.

Traduci

Passo 4 Keyboard

Dell Inspiron 8600 Lower Case Replacement, Keyboard: passo 4, immagine 1 di 3

Dell Inspiron 8600 Lower Case Replacement, Keyboard: passo 4, immagine 2 di 3

Dell Inspiron 8600 Lower Case Replacement, Keyboard: passo 4, immagine 3 di 3

Using the Phillips #1 remove the screws at the top of the keyboard as indicated.
Do not just lift up. There is a tab underneath the keyboard that is still connected to the mother board.
You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
The keyboard should be easily removable at this point.

Traduci

Passo 5 Display Module

Dell Inspiron 8600 Lower Case Replacement, Display Module: passo 5, immagine 1 di 2

Dell Inspiron 8600 Lower Case Replacement, Display Module: passo 5, immagine 2 di 2

Flip the laptop over and remove the indicated screws.
Flip the laptop back over.
Find the two places where the display module is attached to the base of the computer.

Traduci

Passo 6

Disconnect the video card from the display module by gently lifting upwards on the black tab.

Traduci

Passo 7

Lift the display module directly upwards from the base of the computer.

Traduci

Passo 8

Now remove the display module.

Traduci

Passo 9 Lower Case

Dell Inspiron 8600 Lower Case Replacement, Lower Case: passo 9, immagine 1 di 1

Remove the two screws holding down the upper case.

Traduci

Passo 10

Remove the metal bar which connects the motherboard to the lower case.

Traduci

Passo 11

Disconnect the optical disk drive by gently pulling upward.

Traduci

Passo 12

Dell Inspiron 8600 Lower Case Replacement: passo 12, immagine 3 di 3

Remove the optical disc drive by pushing a small release button on the side of the laptop and then pulling it.
This will uncover one final screw that will need to be removed.

Traduci