Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the ten 7mm Phillips #1 screws on the bottom cover.
-
Remove the bottom cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 3mm Phillips #1 screws holding the battery.
-
Unhinge the connector cable to the battery.
-
Remove the battery.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Begin by unclipping the cable connecting the fan and the motherboard.
-
Gently separate the motherboard cable from the clamp at the bottom of the fan.
-
Remove the cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 3mm Phillips #1 screws that hold the fan into place.
-
Remove the fan.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.