Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will show you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Peel off the tape that secures the hard-drive cable to the palm-rest assembly.
-
-
-
Using the pull tab, disconnect the hard-drive cable from the system board.
-
-
-
Remove the two screws (M2x3.5) that secure the hard-drive assembly to the palm-rest assembly.
-
-
-
Lift the hard-drive assembly, along with its cable, off the palm-rest assembly.
-
-
-
Disconnect the interposer from the hard-drive assembly.
-
-
-
-
Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
-
-
-
Align the screw holes on the NEW hard-drive bracket with the screw holes on the hard drive.
-
-
-
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
-
-
-
Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly.
-
-
-
Replace the two screws (M2x3.5) that secure the hard-drive assembly to the palm-rest assembly.
-
-
-
Adhere the tape that secures the hard-drive cable to the palm-rest assembly.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.