Salta al contenuto principale

Introduzione

The PCI slot can hold many different types of cards, such as a dial up modem, wifi receiver, or bluetooth.

Parti

Nessuna parte specificata.

  1. Unscrew the two large screws in back holding on the side panel. Slide the panel backwards to remove it Unscrew the two large screws in back holding on the side panel. Slide the panel backwards to remove it
    • Unscrew the two large screws in back holding on the side panel. Slide the panel backwards to remove it

  2. The PCI slots are located at the bottom back of the computer. Unscrew the screw to release the metal piece that holds the cards in place. Unscrew the screw to release the metal piece that holds the cards in place.
    • The PCI slots are located at the bottom back of the computer.

    • Unscrew the screw to release the metal piece that holds the cards in place.

  3. Slide the card in the PCI slot up and out, in this case a dial up modem. Slide the card in the PCI slot up and out, in this case a dial up modem.
    • Slide the card in the PCI slot up and out, in this case a dial up modem.

  4. Take the new card and slide it into the slot you just removed the old one out of. Remember to replace the metal piece you removed earlier to secure the cards in place. Remember to replace the metal piece you removed earlier to secure the cards in place.
    • Take the new card and slide it into the slot you just removed the old one out of.

    • Remember to replace the metal piece you removed earlier to secure the cards in place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Drew Cunningham

Membro da: 25/03/2015

566 Reputazione

5 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 4

Tutti i Tempi: 386