Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Compra
    • Turn off power to the laptop.

    • Unplug the charging cable from the laptop.

    • Failure to unplug the charging cable could result in damaging the computer or seriously injuring yourself.

    • Wear the anti-static wrist strap or work in an uncarpeted area to prevent static shocks. Shocks may damage the components.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 2 : passo 2, immagine 2 di 2
    • First carefully turn the laptop over so you can access the battery.

    • Switch each of the battery latches to the "unlocked" position.

    • Pull battery upwards by the tab to remove from the laptop.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 3 : passo 3, immagine 2 di 3 : passo 3, immagine 3 di 3
    • Remove the 5.5mm screw that secures the optical-drive assembly to the computer base

    • Using your fingertips, slide the optical-drive assembly out of the optical drive bay.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 3 : passo 4, immagine 2 di 3 : passo 4, immagine 3 di 3
    • This step is only needed if replacing the optical drive.

    • Remove the 2.5mm screw that secures the optical-drive bracket to the optical drive assembly.

    • Remove the optical-drive bracket from the optical-drive assembly.

    • Carefully pull the optical-drive bezel and remove it from the optical drive.

Linea Traguardo

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 132