Introduzione

It is possible for SRAM to break over time with heavy use. Users may also decide that they would like more and/or faster SRAM in their laptop. This guide will show users how to replace the SRAM of the device.

Parti

Nessuna parte richiesta.

  1. Remove the two 6.5 mm PH1 Philips head screws from the laptop. Lift up the  small panel from the top, using the spudger if necessary. Lift up the  small panel from the top, using the spudger if necessary.
    • Remove the two 6.5 mm PH1 Philips head screws from the laptop.

    • Lift up the small panel from the top, using the spudger if necessary.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed. Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed. Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed.
    • Press the tabs on the RAM inward. The SRAM should pop out of the slot and be easily removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 63