Introduzione

In this guide, we will be showing you how to remove and replace the Hard-Drive Assembly.

Parti

Nessuna parte richiesta.

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin". After working inside your computer, follow the instructions in "After Working Inside Your Computer".

    • CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On state.

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

  1. Remove the screws that secure the hard-drive assembly to the computer base.
    • Remove the screws that secure the hard-drive assembly to the computer base.

  2. Slide the hard-drive assembly forward to disconnect the hard-drive assembly from the system board.
    • Slide the hard-drive assembly forward to disconnect the hard-drive assembly from the system board.

  3. Using the pull-tab, lift the hard-drive assembly out of the computer base.
    • Using the pull-tab, lift the hard-drive assembly out of the computer base.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove the screws that secure the hard-drive bracket to the hard drive.
    • Remove the screws that secure the hard-drive bracket to the hard drive.

  6. Lift the hard-drive bracket off the hard drive.
    • Lift the hard-drive bracket off the hard drive.

  7. Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.
    • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

  8. Replace the screws that secure the hard-drive bracket to the hard drive.
    • Replace the screws that secure the hard-drive bracket to the hard drive.

  9. Slide and place the hard-drive assembly in the hard-drive bay.
    • Slide and place the hard-drive assembly in the hard-drive bay.

  10. Slide the hard-drive assembly backward to connect the hard-drive assembly to the system board.
    • Slide the hard-drive assembly backward to connect the hard-drive assembly to the system board.

  11. Replace the screws that secure the hard-drive assembly to the computer base.
    • Replace the screws that secure the hard-drive assembly to the computer base.

Linea Traguardo

Terrence15

Membro da: 18/12/2017

70.653 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 43