Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will be utilized if you are having issues with reading disks and it is not a firmware problem.

  1. Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
    • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

    • Turn the laptop over to its back.

  2. Slide the release latch while simultaneously pulling backwards on the battery.
    • Slide the release latch while simultaneously pulling backwards on the battery.

  3. Slide the battery out of the battery bay.
    • Slide the battery out of the battery bay.

  4. Flip the laptop to its back side.
    • Flip the laptop to its back side.

    • Remove the screw (5mm Phillips #1) that secures the Optical Disk Drive on the back of the laptop.

  5. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive. Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.
    • Push the Optical Disk Drive out using a spudger tool as shown and pull from the front cover of the Optical Disk Drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Nathan Lemay

Membro da: 16/04/2014

2.746 Reputazione

15 Guide realizzate

Team

Cal Poly, Team 9-14, Regan Spring 2014 Membro di Cal Poly, Team 9-14, Regan Spring 2014

CPSU-REGAN-S14S9G14

4 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,798