Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the flat end of the spudger press in the 5 tabs, located on top of the keyboard, as you use the spudger to pry each section up.
-
After releasing the 5 tabs, slide the opening tool around the top and sides of the keyboard to make sure it is fully released.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now lift the keyboard enough to access the ribbon cables beneath it.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
For the two ribbon cables connecting the keyboard to the laptop, use your finger to lift the latch up.
-
Once the latch is raised, lift the ribbon cable up and out of the latch.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now that the keyboard has been fully disconnected from the laptop, lift it off of the device.
-
Annulla: non ho completato questa guida.
Altre 8 persone hanno completato questa guida.
2 Commenti
How to put it back
Do the steps in reverse order, like it says at the end of the tutorial