Dell Inspiron 15-5559 Back Panel Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Before removing the back panel, make sure the device is disconnected from any power source. Make sure that your battery has also been removed.

Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.

Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.
Do not be afraid to use a bit of muscle, as the panel does not come off without some force.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Membro da: 03/19/18

580 Reputazione

4 Guide realizzate

BU-WILLIAMS-S18S5G5

3 Membri

5 Guide realizzate