Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will be showing you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Using the pull tab, disconnect the hard-drive cable from the system board.
-
-
-
Peel off the tape that secures the hard-drive cable to the palm rest and keyboard assembly.
-
-
-
Note the hard-drive cable routing and remove the cable from the routing guides.
-
-
-
Remove the three screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.
-
-
-
Lift the hard-drive assembly along with its cable off the palm rest and keyboard assembly.
-
-
-
-
Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
-
-
-
Align the screw holes on the NEW hard-drive bracket with the screw holes on the hard drive.
-
-
-
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
-
-
-
Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.
-
-
-
Replace the screws three (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.
-
-
-
Route the hard-drive cable through the routing guides on the palm rest and keyboard assembly.
-
-
-
Adhere the tape that secures the hard-drive cable to the palm rest and keyboard assembly.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.