Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will show you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Remove the screws that secure the hard-drive assembly to the computer base.
-
-
-
Lift the latch and disconnect the hard-drive cable from the system board.
-
-
-
-
Remove the screws that secure the hard-drive bracket to the hard drive and lift the hard-drive bracket off the hard drive.
-
-
-
Place the hard-drive bracket over the NEW hard drive and align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
-
-
-
Replace the screws that secure the hard-drive bracket to the hard drive.
-
-
-
Slide the hard-drive assembly in the computer base and align the screw holes on the hard-drive assembly with the screw holes on the computer base.
-
-
-
Slide the hard-drive cable into its connector and close the latch to secure the cable.
-
-
-
Replace the screws that secure the hard-drive assembly to the computer base.
-