Introduzione

In this guide, we will be showing you how to remove and replace the Hard Drive Assembly.

Parti

Nessuna parte richiesta.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the screw that secures the hard-drive assembly to the system board.

  2. Slide the hard-drive assembly in the direction shown in the illustration to  disconnect it from the connector on the system board.
    • Slide the hard-drive assembly in the direction shown in the illustration to disconnect it from the connector on the system board.

  3. Lift the hard-drive assembly off the system board.
    • Lift the hard-drive assembly off the system board.

  4. Remove the four screws that secure the hard-drive bracket to the hard  drive.
    • Remove the four screws that secure the hard-drive bracket to the hard drive.

  5. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  6. Lift the hard drive away from the hard-drive bracket. Lift the hard drive away from the hard-drive bracket.
    • Lift the hard drive away from the hard-drive bracket.

  7. Place the hard drive in the hard-drive bracket.
    • Place the hard drive in the hard-drive bracket.

  8. Replace the four screws that secure the hard-drive bracket to the hard  drive.
    • Replace the four screws that secure the hard-drive bracket to the hard drive.

  9. Place the NEW hard-drive assembly on the system board.
    • Place the NEW hard-drive assembly on the system board.

  10. Slide the hard-drive assembly to connect it to the connector on the system  board.
    • Slide the hard-drive assembly to connect it to the connector on the system board.

  11. Replace the screw that secures the hard-drive assembly to the system board.
    • Replace the screw that secures the hard-drive assembly to the system board.

Linea Traguardo

Terrence15

Membro da: 18/12/2017

70.653 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 18