Introduzione

In this guide, we will be showing you how to remove and replace the Display Assembly.

Parti

Nessuna parte richiesta.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws from the computer base.

  2. Loosen the display cable grounding screw.
    • Loosen the display cable grounding screw.

    • Disconnect the display cable from the connector on the system board.

    • Remove the four screws that secure the display assembly to the computer base.

    • Lift the display assembly off the computer base.

    • Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

    • Route the display cable and Mini-Card antenna cables through the routing guides.

    • Connect the display cable to the connector on the system board.

    • Tighten the display cable grounding screw.

    • Replace the two screws at the bottom of the computer.

Linea Traguardo

Terrence15

Membro da: 18/12/2017

70.228 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 15