Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the computer over.
-
Loosen the two captive screws securing the hard drive cover and then remove the cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the hard drive assembly using the pull-tab.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws securing the hard drive to the hard drive assembly.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide out the hard drive from the hard drive assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the NEW hard drive in the hard drive assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Tighten the two screws to secure the hard drive to the hard drive assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the hard drive assembly in the hard drive bay by aligning the tabs on the hard drive assembly with the slots in the bay and pressing the connector end down.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Replace the hard drive door and tighten the screws.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.